416.686.5048

Super Matte 50ML x2

$39.00

This modern surface protection leaves vehicles or equipment looking dull or matt and non-reflecting.

A few decades ago the matte surface finish was discovered as a stylistic element and it is becoming increasingly popular. Our surface protection guarantees easy application and is an environmentally friendly and value-maintaining sealing for all matt coated, matt plastic coated and matt dip-lacquered surfaces.

A sealing of surface pores is not possible with this product!
Permanon Matt contains only monomeric silicium on an aqueous basis. The products of other manufacturers often contain silicone oils or fluor silane, in connection with polymers and/or solvents. Permanon Matt is recommended by www.skinzwraps.com! The special properties of Permanon Matt are designed to deliver the ultimate in protection of matt surfaces. The showiness of shiny surfaces is suppressed to achieve an elegant matt-effect.

46 in stock

SKU: 42 600 5735 650 5 Categories: , , Tags: ,

Additional information

A variety of possible uses for Matt:

matt finish and lacquer foil
sealing without gloss enhancement
UVA and UVB protection
hardness protection (degree of hardness 8)
electrostatic adhesion
no chemical bond with coatings or plastic film
after initial application less cleaning applications are necessary
Polishing is not necessary; unobtrusive appearance of matt surfaces on:

rally cars and show vehicles
camouflage and camouflage vehicles
sports, and leisure devices
indoor and outdoor furniture – etc.

Gloss-level measurement

3 M – Matte films Before After
matt-white 1080 / M10 5,7 % 5,8 %
matt-black 1080 / M12 4,4 % 4,5 %
matt-silver 1080 / M21 4,7 % 4,9 %
matt-military green 1080/ M26 3,8 % 4,0 %

Carbon Fiber
matt-black 1080 / CF12 7,9 % 8,4 %
matt-anthracite 1080 / CF21 9,2 % 9,5 %
+ light irradiation angle of 60°
+ the test was done with mat film 3M and on carbon fiber
+ an irradiation angle of 60° was chosen for sunlight, as this coincides with the average angle of incidence of the sun

Application

Fast and thorough application made easy

Dab or spray a 5% (1:20) solution on the surface to be protected. It must have been cleaned thoroughly and fat-free before. Remove excess cleaner afterwards, rinse or dry.

No reaction time required, and the product need not be rubbed on or polished. This is a much simpler application than what is required for competitor products. You will receive a protective, glossy effect. Also, follow-up maintenance/cleaning will be simplified by up to 80%.

Dosage

Dosage:
For the first application, 2% – 5%.
For a brush-up a 2% – 3% concentration will be sufficient.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.